• No matching documents

    Handsets not using ZTP

    Handsets that haven't been purchased through IPCortex won't be configured to use zero touch provisioning and will need manual configuration to start the provisioning process.

    Note: Handsets that haven't been purchased through IPCortex my incur a configuration charge.

    Yealink
    • Plug the phone, Internet socket, into a network port with a network cable.
    • Once the phone has booted, press the OK button to get the status screen.
    • Make a note of the IPv4: address.
    • Browse to http://address and login with the default username (admin) and password (admin).
    • Navigate to Settings → Auto Provision.
    • Set PNP Active to Off.
    • Set DHCP Active to Off.
    • Fill in Server URL (http://yealink.hosted.ipnsl.net/)
    • Click Confirm and restart the handset.
    Polycom
    • Plug the phone, Internet socket, into a network port with a network cable.
    • Navigate to the network status screen by pressing the Home button → Settings → Status → Network → TCP/IP Parameters.
    • Make a note of the IP: address.
    • Browse to https://address and login with the default username (Admin) and password (456).
    • Navigate to Settings → Provisioning Server.
    • Set Server Type to HTTPS.
    • Fill in Server Address (provision.hosted.ipnsl.net)
    • Click Save and restart the handset.
    snom
    • Plug the phone, NET socket, into a network port with a network cable.
    • Enter the language, time zone and tone scheme, next you will be presented with a Welcome screen.
    • Press the up arrow.
    • Make a note of the IP Adr: address.
    • Browse to http://address.
    • Navigate to Advanced → Update.
    • Fill in Setting URL: (https://provision.hosted.ipnsl.net/)
    • Set PnP Config: to off.
    • Click Apply and restart the handset.

    Once complete please contact IPCortex support with a list of MAC addresses for the handsets to be authorised.